Distributed wind + solar
Own yourpower.
Wind and solar that keeps working at night
GridLeaf is a modular wind and solar unit designed and built in Troy, New York. One small footprint, power around the clock.
- 450Wwind, rated
- 240Wsolar canopy
- 4.7mphcut-in
- 2×2ftfootprint
Beyond the grid, power gets expensive.
Diesel generator
- Unstable fuel prices
- Refueling and engine maintenance
- Noise and exhaust pollution
Solar + battery
- Renewable energy
- Needs ~110 sq ft of panels to cover gaps
Grid extension
- Invasive digging to install
- Vulnerable to grid outages
- Locked into rising utility rates
GridLeaf + battery
- 4 sq ft footprint
- Renewable power
- Portable for flexible operations
Same load for every option: 2 kWh a day, year-round, over 20 years. GridLeaf puts wind and solar on one footprint to produce through the hours and seasons solar can’t.
How we calculated this
20-year levelized cost at a 6% discount rate. Diesel at $6.20/gal (US average, October 2026). Grid at 19¢/kWh rising 5% a year, plus a 300 ft underground run at $20/ft. Solar and battery sized to cover a Northeast December. GridLeaf at $6,000 installed with battery today, about $3,000 at scale, on a well-sited unit.
More power, less system.
Wind is often strongest in the colder months and at night, meaning GridLeaf keeps turning when solar is weakest. One unit with both gives flatter output across the day and the year, so a site needs far less “system” to hit the same reliability target.
GridLeaf pairs a 450 W flow-boosted wind turbine with a 240 W solar canopy in a single 2 ft × 2 ft footprint.
Portable
Bolted modules come apart for transport and go back up with hand tools.
On or off the grid
Feeds a building’s loads or runs standalone with battery storage.
Flexible mounting
Ground, wall, or roof mounting without permanent infrastructure.
Custom branding
Every panel can carry your colors, logo, or message.
Quiet
GridLeaf registers less than 40 dB during ambient operation.
Your unit, your message
The side panels are the biggest surfaces on the unit, so we treat them as a billboard. Put your logo, your colors, or a message on them.
For a business, a campus, or a town, that turns an energy system into something people stop and look at.
How we size a site
Pull the data
We aggregate multiple long-term wind and solar datasets for your exact location to tailor unit configuration to your site.
Model the output
We estimate annual energy using the rotor performance we’ve measured on our own units, not a catalog number.
Visit the site
We confirm the mounting location, wind exposure, and electrical tie-in in person.
Send a proposal
You get expected production, cost, and an install plan in writing before anything is built.
Gen 2 pilots are open now.
Tell us about your site and what you need to power. We’ll run the numbers and tell you straight whether GridLeaf is the right fit.